Arlo Camera Flashing Orange Light

Arlo cameras have become a popular choice for home security, providing users with the ability to monitor their surroundings with high-quality video. As with any electronic device, Arlo cameras may sometimes encounter issues that cause them to not perform as expected. One common issue is the camera flashing an orange light, which may indicate a problem with connectivity, power, or syncing.

The flashing orange light signifies a potential problem with the connection between the Arlo camera and its base station or Wi-Fi network. It could also mean that the batteries inside the device need to be replaced. In addition, the orange light may appear if the camera has lost its sync with the base station, which is necessary for maintaining an active connection and transmitting video footage.

Understanding the Arlo Camera Flashing Orange Light

Blinking Orange vs Solid Orange

Arlo cameras use LED lights to display their status. When it comes to an orange LED light, there are two types you might encounter: blinking and solid.

  • Blinking orange: This commonly indicates that the camera is experiencing an issue, such as being out of sync with the base station or having a low battery.
  • Solid amber: A solid amber LED light typically signifies that the camera is charging, especially if it’s connected to a power source.

Significance of Orange LED Lights

Orange LED lights on an Arlo camera serve specific purposes and provide essential information about the camera’s condition. Here are the main instances when you might see orange LED lights:

  1. Out of sync: A blinking orange light may signal that the camera is out of sync with its base station. To resolve this, try re-syncing the camera by pressing the sync button on both the camera and base station until the LED turns blue.
  2. Low battery: Another reason for a blinking orange light can be that the camera’s battery is running low. In this case, replacing the battery or connecting the camera to a power source should fix the issue.
  3. Resetting: When you reset an Arlo camera, you may observe the front LED flashing amber. To reset the camera, press and hold the reset button on the back of the camera for 10 seconds until the LED flashes amber.

Remember, the orange LED lights on your Arlo camera are essential indicators of its current status. By understanding the difference between blinking orange and solid amber lights, you can better diagnose and address any issues that may arise.

Common Causes of Flashing Orange Light

Low Battery and Charging Issues

When Arlo camera flashes an orange light, it can be an indication of low battery or charging problems. It’s important to check your camera’s battery status and ensure that it’s adequately charged. If the blinking orange light persists, consider changing the batteries in the device. Always use compatible batteries to prevent further issues.

Connectivity and Wi-Fi Interference

Another common cause for the flashing orange light on an Arlo camera is connectivity issues, which could be due to Wi-Fi interference. When your camera is experiencing difficulty connecting to your Wi-Fi network or maintaining a strong connection, the LED light may blink orange. To fix this, try moving the camera closer to your Wi-Fi router or use a Wi-Fi range extender to improve signal strength. Ensure that there are no physical obstacles or electronic devices causing interference with the Wi-Fi signal.

Firmware Updates and Syncing

Arlo cameras may also flash orange light during firmware updates or while syncing with the base station. It’s essential to keep your camera’s firmware up to date for optimal performance and security. To check if a firmware update is available, follow these steps:

  1. Open the Arlo app and go to the settings menu.
  2. Tap on your camera’s name and choose “Device info.”
  3. Look for a firmware update option and follow the on-screen instructions to update.

It’s also possible that the flashing orange light is caused by syncing issues. To sync your Arlo camera with the base station, follow these steps:

  1. Bring your camera close to the base station.
  2. Press the “Sync” button on the base station.
  3. Wait for the LED to blink green on the base station.
  4. Press the “Sync” button on the camera.
  5. Check if the LED stops blinking orange and shifts to solid blue on the camera.

By addressing these common causes of the flashing orange light on your Arlo camera, you can effectively troubleshoot and resolve any technical issues that may be affecting the device’s performance.

Troubleshooting the Arlo Camera Flashing Orange Light

Checking Device Settings and Connectivity

To troubleshoot the flashing orange light on your Arlo camera, start by checking the device settings and connectivity. Ensure that the camera is connected to a Wi-Fi network and that your mobile device or computer is connected to the same network. If the camera is not connected to a Wi-Fi network, follow these steps:

  1. Open the Arlo app or access the Arlo web portal.
  2. Navigate to the Settings menu.
  3. Select My Devices.
  4. Choose the camera that is experiencing the issue.
  5. Look for any error messages or indicators suggesting a connection issue.

Rebooting Base Station and Router

Sometimes rebooting your Arlo base station and router can resolve connectivity issues. Follow these steps to reboot both devices:

  1. Unplug the power adapter from your Arlo base station.
  2. Unplug the power adapter from your router.
  3. Wait for at least 30 seconds.
  4. Plug the power adapter back into the router and wait until it fully starts.
  5. Plug the power adapter back into the Arlo base station and wait for it to fully start.

After both devices have rebooted, check if the flashing orange light persists on your Arlo camera.

Syncing Arlo Cameras with Base Station

If the issue persists after checking the device settings and rebooting the base station and router, try syncing the Arlo camera with the base station. Follow these steps:

  1. Press the Sync button on the side of your Arlo base station for two seconds and then release it.
  2. Within a few minutes, press and hold the Sync button on the Arlo camera until the flashing orange light changes to a blinking blue light.
  3. Release the Sync button and wait for the camera LED to blink rapidly blue. This indicates that the sync process was successful.

Please note that the syncing process may be different for specific Arlo camera models. Consult your user manual for detailed instructions on syncing your specific Arlo camera.

Resolving the Issue with Factory Reset and Manual Configuration

Performing a Factory Reset on Base Station

To resolve the flashing orange light issue on your Arlo camera, start by performing a factory reset on the base station. Follow these steps:

  1. Locate the Reset button on the back of the base station.
  2. Press and hold the Reset button until all LEDs flash amber.
  3. Allow the base station to come back online with a solid green internet LED.
  4. Proceed with the New System Setup process.

Setting up Arlo Wire-Free Cameras Manually

If the factory reset doesn’t resolve the issue, you can try setting up your Arlo wire-free cameras manually. Follow these steps:

  1. Remove the camera from your Arlo account within the app.
  2. Press the Sync button on the base station, ensuring the camera light starts flashing.
  3. Press and hold the Sync button on the camera for about two seconds; the camera’s LED should blink blue rapidly.
  4. Observe if the camera’s LED changes to a steady blue, indicating that the camera is synced with the base station.
  5. Re-add the camera to your Arlo account using the app.

Make sure that your Arlo wire-free camera is within optimal range of the base station to establish a stable connection. Additionally, ensure that the camera’s firmware is up-to-date to avoid any potential issues.