Home security systems have seen significant advancements in smart technology, and the popularity of video doorbells is rapidly growing. A prominent brand in the smart home security space is Arlo, which offers a variety of video doorbell options. Although often easy to set up and maintain, some users may face issues with their Arlo doorbell, such as flashing red and white lights. In this article, we will explore the possible causes of this flashing pattern and discuss solutions to resolve the issue.
Table of Contents
Arlo Doorbell Flashing Red and White: Causes and Solutions
Low Battery Issues
One of the common reasons for your Arlo doorbell flashing red and white could be related to low battery issues. When the battery level is low, the LED light on the doorbell might flash red and white to indicate the need for a battery replacement or recharge. To address this issue, you can take the following steps:
- Check the battery level: Use the Arlo app to check the doorbell’s battery level. If it’s low, consider recharging or replacing the battery as needed.
- Recharge or replace the battery: If the battery is rechargeable, connect the doorbell to a power source to recharge the battery. Otherwise, replace the battery with a new one.
Operating Temperature Problems
Another possible cause for your Arlo doorbell flashing red and white could be related to the operating temperature of the device. If the doorbell is exposed to extreme temperature conditions (either too hot or too cold), it might malfunction and flash red and white. Here are some ways to address this issue:
- Check the operating temperature range: Arlo doorbells typically have an operating temperature range specified in the product manual. Ensure that the doorbell has been installed within the recommended range.
- Temperature control measures: If the doorbell is exposed to extreme temperatures, consider adding some insulation or a weatherproof case to help protect it from temperature fluctuations.
By addressing these common causes, you can potentially resolve the red and white flashing issue on your Arlo doorbell and ensure its proper functioning.
Arlo Doorbell LED Behaviors and Their Meanings
In this section, we will discuss the various LED lights exhibited by the Arlo doorbell and what they signify.
Solid White Light
When the Arlo doorbell displays a solid white LED, it indicates that the doorbell is working and needs to be set up. To set up the doorbell, open the Arlo app on your mobile device, select “Add Device,” and follow the on-screen instructions to connect your doorbell to your Wi-Fi network.
Fading White Light
A fading white LED on the Arlo doorbell signifies that the doorbell is in pairing mode. In this mode, the doorbell can be connected to the Wi-Fi network and paired with the Arlo app on your mobile device.
Flashing White Light
A flashing white LED typically indicates that the doorbell is either picking up on something, or it is ending a call.
Solid Amber Light
A solid amber LED on the Arlo doorbell indicates that the doorbell is not receiving enough power. Your Arlo Essential Video Doorbell Wired must be connected to a doorbell transformer with a voltage level of 16-24V AC. If your doorbell transformer is below the necessary voltage level, consult an electrician.
Alternating Amber and White Light
When your Arlo doorbell exhibits an alternating amber and white LED light it means that the doorbell is in pairing mode. During this mode, you should open the Arlo app on your mobile device, select “Add Device,” and follow the on-screen instructions to connect your doorbell to your Wi-Fi network.
Flashing Amber Light
A flashing amber LED has not been explicitly mentioned in the provided search results. However, if you encounter this alert, it is recommended to follow the troubleshooting guidelines in the Arlo app or consult the user manual for more information.
Troubleshooting Arlo Doorbell Issues
Connectivity and Wi-Fi Issues
When facing connectivity or Wi-Fi issues with the Arlo doorbell, there are a few things you can try:
- Check the Wi-Fi network: Ensure that your doorbell is connected to a Wi-Fi network, and the network is stable. If not, reconnect your doorbell to the network.
- LED alerts: A slowly blinking white light indicates that your doorbell is attempting to connect to your base station or Wi-Fi network, while a quickly blinking white light indicates connection issues.
- Resetting the Doorbell: If the issue persists, try resetting the doorbell by pressing and holding the reset button for 15 seconds, then follow the setup process.
Voltage and Wiring Issues
Arlo Essential Video Doorbell Wired requires a voltage level of 16-24V AC to function properly:
- Solid amber LED: If the LED light is solid amber, your doorbell is not receiving enough power. This could be due to insufficient voltage or wiring issues.
- Check the voltage level: Consult with an electrician to verify your doorbell transformer’s voltage level. If it’s below the necessary voltage, consider upgrading the transformer.
- Power kit: Ensure that the power kit provided with the doorbell is installed correctly. Incorrect installation could lead to power problems.
- Operating temperature: Extreme temperatures could affect the doorbell’s internal battery and performance. Make sure it is within the operating temperature range of -4°F to 113°F (-20°C to 45°C).
Motion Detection Problems
Motion detection issues can affect the reliable operation of your Arlo doorbell. To troubleshoot these issues:
- Adjust motion settings: Using the Arlo app, adjust the motion detection settings to improve detection accuracy and sensitivity.
- Two-way audio: Ensure that your doorbell’s two-way audio is functioning properly. If not, try resetting the doorbell.
- Error messages: If you receive an error message related to motion detection, follow the provided instructions to resolve the issue.
- Camera view: Make sure your doorbell’s camera view is clear and unobstructed to enhance motion detection capabilities.
Setting Up the Arlo Doorbell
WiFi and Internet Setup Process
To set up your Arlo doorbell, start by connecting it to your WiFi network. Your doorbell requires a stable 2.4GHz WiFi connection for smooth operation. Turn on your doorbell and ensure it is in pairing mode, indicated by its LED flashing red and white. On your smartphone, tablet, or other compatible device, open the Arlo app and log in to your account. Select “Add Device” and follow the on-screen instructions to connect your Arlo doorbell to your WiFi network. Once connected, the doorbell’s LED will change to blinking white, signifying a successful setup.
Ensure that your internet connection is strong and stable for an optimal experience. You may need to be close to your router during the initial setup process. If your doorbell fails to connect, try moving closer to your router and going through the steps again.
Doorbell Voltage and Wiring
The Arlo Essential Video Doorbell Wired requires a doorbell transformer with a voltage level of 16-24V AC. If the doorbell shows a solid amber LED, it means it’s not receiving enough power. In this case, consult an electrician to have your doorbell transformer checked and adjusted accordingly. Proper wiring is essential for the doorbell to function correctly. Wiring connections should be secure and follow the recommended guidelines provided by Arlo’s support documentation.
Arlo App and QR Code Scanning
Once your doorbell has been successfully connected to your WiFi network, you will need to set up its device settings and preferences through the Arlo app. The QR code found in your Arlo doorbell package or the app will be required for this step.
Scan the QR code using your smartphone or tablet, and the Arlo app will guide you through the setup process. During setup, you will be able to configure the doorbell’s features such as motion detection sensitivity, bypass mode, custom alerts, and two-way audio. Upon completion, the doorbell’s LED will change to solid white or white fading off, indicating successful setup and functioning.
Keep your Arlo app updated to ensure that your doorbell remains compatible with the latest features and security updates. Regularly check your device settings and WiFi connection to guarantee an optimal user experience.
Firmware Updates
Arlo frequently releases firmware updates to improve the performance, security, and functionality of their home security systems. Keeping your Arlo devices up-to-date helps ensure that they work optimally and provide the best security for your home. Users can check for available updates through the Arlo Mobile App, which will show notifications if new firmware is available.
In summary, Arlo offers various valuable resources to support users in addressing any issues with their home security systems, including personalized customer support, helpful articles, and firmware updates. By utilizing these resources, users can ensure their Arlo doorbells and other devices are functioning at their best.