The Blink camera flashing green light can be confusing. For the most part, a solid green light on a Blink camera indicates normal functioning and should not be a cause for concern. However, if the green light is flashing, it usually denotes a problem related to connectivity or the device’s setup.
In this article, we will discuss what a flashing green light on your Blink camera means and provide answers on how to fix the issue. We will also offer suggestions on when to seek help from Blink customer service to ensure the smooth functioning of your camera and a secure home environment.
Table of Contents
Understanding Blink Camera and Its LED Indicators
Blink cameras use LED indicators to provide users with information about the camera’s status. These indicators include green, flashing green, and red lights. In this section, we’ll go over the meaning of each light to help you understand your Blink camera better.
Flashing Green Light
If the green LED is flashing on your Blink camera, it often means there’s an issue with the internet connection. This could be due to an unstable connection or something else that has triggered a status change, like a problem with the router connection or the power cable.
To resolve this issue, you can try the following steps:
|1.||Unplug the power cable from your router and modem for 30 seconds, then plug them back in.|
|2.||Wait a few minutes for the modem and router to boot up.|
|3.||Check the Camera Settings in the Blink app to know the signal strength (make sure both the Camera to Sync Module and the Camera to Network signals have at least 3 bars).|
Connection and Network Issues
Blink Camera’s connectivity highly depends on your internet connection. To ensure proper functioning, make sure you have a stable internet connection. If you’re facing disconnection due to internet outages, it might help to invest in a backup internet solution or a more reliable ISP.
WiFi and Router Settings
Here are some steps to troubleshoot issues related to WiFi and router settings with your Blink Camera:
|Reset your router||Unplug the power cable from your router, wait for 30 seconds, and plug it back in. Let the router fully boot before trying the camera again.|
|Check your router settings||Check your router settings for any restrictions, such as limiting the number of connected devices or blocking specific devices. Make sure your Blink Camera is allowed to connect to your network.|
|Check that the camera is connected to the right WiFi network||Make sure your camera is connected to the correct WiFi network, especially if you have multiple wireless networks in your home.|
The signal strength between the Blink Camera and your router plays a crucial role in delivering a smooth and efficient experience. To check the signal strength of your Blink Mini or any other Blink Camera, follow these steps:
- Open the Blink app.
- Tap on the Camera Settings icon for your camera.
- Select General Settings and scroll down to the Network section.
- Observe the signal strength between the Camera to Sync Module and Camera to Network. Ideally, you should have 3 bars for good connectivity.
If you notice a poor signal, consider the following solutions:
- Move the camera closer to the router or sync module.
- Remove any obstacles or interference-causing devices between the camera and the router.
- Use Wi-Fi extenders to improve the Wi-Fi signal in your home.
Following these guidelines should help you address connection and network issues with your Blink Camera and ensure proper functioning.
Troubleshooting Blink Camera Flashing Green
Restarting and Resetting Devices
When experiencing a flashing green light on your Blink camera, it is essential to try restarting and resetting the devices involved. To reset the Blink camera, remove the batteries (or unplug the power cable for Blink Mini) and leave the camera to rest for a minute. Afterward, reinsert the batteries (or plug the power cable back in) and power ON the camera. If using a Blink Mini, press and hold the reset button on the bottom of the camera for 10-15 seconds or until a solid green and flashing blue light appear.
To reset the sync module, press and hold the reset button until the flashing red light starts to blink. When the LED begins to blink green and blue, release the button.
If the green light continues to flash on your Blink home security camera, power cycling your devices may help. To do this, unplug the power cords from your modem, router, and sync module. Wait about 20-30 seconds before plugging the devices back in. Allow them to fully boot up before checking if the issue is resolved.
Check Server Outages
Sometimes, a flashing green light on your Blink camera may result from Blink server outages. You can visit Blink Support’s website or check Down Detector for any announced server outages. Furthermore, try waiting for some time and check your camera later to see if the issue resolves itself due to server recovery.
Additional Troubleshooting Steps
Software and Firmware Updates
To ensure the optimal performance of your Blink camera, regularly check for software and firmware updates. These updates may include bug fixes and improvements that address the issue of the green LED flashing. Open the Blink app, go to Camera Settings, and check for any available updates. Also, make sure your Blink camera is connected to a stable Wi-Fi connection during this process, as it requires uninterrupted internet access to download and install updates.
Hardware Issues and Fixes
There might be hardware-related issues causing the green LED to flash on your Blink camera, such as battery level, camera position, or power supply. For Blink Mini, Blink Indoor, and Blink XT cameras, perform the following steps:
- Check the battery level: Ensure that the batteries powering your camera are not depleted. Replace them if necessary.
- Ensure the camera is properly positioned: Adjust the camera angle and position to maintain a strong signal with the Wi-Fi network and sync module.
- Reset the camera: Press and hold the reset button on the bottom of the Blink Mini camera for 10-15 seconds, or until you see a solid green light and flashing blue light. Then, open the Blink app and set up the camera again.
If none of these steps resolve the issue, contact Blink support for further assistance.
Optimizing Wi-Fi Network
Improving your Wi-Fi network can significantly enhance your Blink camera’s performance and decrease instances of the green LED flashing. Follow these steps to optimize your Wi-Fi network:
- Check the signal strength: Open the Blink app, tap on Camera Settings, and look under General Settings in the Network section. A signal strength of 3 bars for both Camera to Sync Module and Camera to Network is ideal.
- Position the camera closer to the router: If the signal strength is weak, move the camera and sync module closer to your Wi-Fi router.
- Use a range extender: Consider using a Wi-Fi range extender to boost the signal strength if your camera is located far from the router.
- Minimize Wi-Fi interference: Relocate any devices that may cause interference, such as microwaves, cordless phones, or Bluetooth devices.
By implementing these steps, you can address potential issues related to your Blink camera’s flashing green LED and ensure the reliable performance of your home security system.
Contact Customer Support
If the flashing green light persists and troubleshooting efforts have not resolved the issue, consider contacting Blink Customer Support for assistance. Amazon’s Blink Support can provide you with the necessary guidance to address the problem and restore your home security camera’s recording capability.