How to Remove Ring Doorbell Without Any Tools

Removing a Ring doorbell without any tools may sound like a daunting task, but with the right approach and some patience, you can successfully complete the process.

Read on as we guide you through a few simple steps that will help you remove your Ring doorbell without requiring any special tools.

Basic Steps to Remove Ring Doorbell

Disconnecting Power

Before you begin the process of removing your Ring doorbell, it’s important to disconnect the power. If your doorbell is battery-powered, locate the battery compartment and remove the battery.

If the doorbell is hardwired, you may need to turn off the circuit breaker that powers your doorbell to ensure your safety during the removal process.

Removing Faceplate

Start by removing the faceplate of your Ring doorbell. This will expose the internal components, including the wires and mounting screws. To do this, pry the faceplate gently with a flathead screwdriver or another thin, flat object.

Be careful not to damage the faceplate during removal, as you may need it for a replacement or future installation.

Unscrewing Security Screw

Once the faceplate is removed, you’ll see the security screw that holds the doorbell in place. This screw is typically located at the bottom of the doorbell unit, and it may require a special screwdriver, such as a Ring screwdriver or a Torx screw, for removal.

Using the appropriate screwdriver or tool, turn the security screw counterclockwise to unscrew it. Keep the screw in a safe location, as you may need it later for a replacement or reinstallation.

After the security screw is removed, you should be able to lift the Ring doorbell from its mounting bracket.

Now that you’ve completed these steps, you can either replace your Ring doorbell with a new one or reattach it after any necessary maintenance or adjustments.

Remember to reattach the faceplate, tighten the security screw, and reconnect the power after completing your task.

Alternative Installation and Removal Techniques

When installing a Ring doorbell, you don’t always have to use the default installation method of drilling holes and using screws.

There are alternative techniques that can make installing and uninstalling your Ring doorbell much easier. In this section, we will discuss using double-sided tape, a no-drill mount, and Velcro strips for installation.

Using Double-Sided Tape

Double-sided tape is a quick and easy way to install a battery-powered Ring doorbell on your door frame or wall. This alternative installation process is ideal for surfaces like wood or brick where drilling holes may not be desirable. To install your doorbell using double-sided tape:

  1. Clean the surface of the area where you want to mount the doorbell.
  2. Apply double-sided tape to the back of the doorbell’s mounting bracket.
  3. Press the mounting bracket firmly onto the chosen surface and hold it for a few seconds.

When you need to remove the doorbell, simply use a dull-edged object to gently pry it off the surface. Be cautious to avoid damaging your door or wall.

However, a downside of using tape is reduced durability compared to screws. The doorbell may be more susceptible to detachment due to weather conditions or intentional removal by others.

No-Drill Mount

A no-drill mount is a convenient way to securely attach your Ring doorbell without having to drill holes. It is a great option for renters or those who wish to preserve the structure of their home. To use a no-drill mount:

  1. Choose a no-drill mount designed specifically for Ring doorbells for the best fit.
  2. Follow the manufacturer’s instructions for attaching the doorbell to the mount.
  3. Place the mount on your desired surface and press firmly.

The uninstall process for a no-drill mount is similar to that of double-sided tape. Gently pry off the doorbell from the surface to avoid damage to your wall or door.

Velcro Strips

Velcro strips offer another way to install a battery-powered Ring doorbell without putting holes in your door or wall. This is an excellent option for temporary installations or frequent removal needs. To install with Velcro strips:

  1. Cut Velcro strips to fit the back of the doorbell’s mounting bracket.
  2. Attach one side of the Velcro strips to the mounting bracket and the other side to your chosen surface.
  3. Press the doorbell firmly onto the surface, ensuring the Velcro adheres securely.

To remove the doorbell, grip the device and gently pull it away from the mounting surface. The Velcro strips will release, allowing for easy uninstallation.

Be aware that using Velcro strips may not provide as strong a bond as screws or double-sided tape, so consider your specific needs and preferences when deciding which method to use.

Tips for Ring Doorbell Maintenance

We will cover two key aspects of maintaining your device: Charging the Battery and Cleaning the Device.

Charging the Battery

To keep your Ring Doorbell functioning properly, it’s essential to regularly charge the battery. Depending on your device model, it may have a built-in or removable battery.

For models with built-in batteries, charge the battery by connecting the charging cable to the device and a wall outlet. 

If your Ring Video Doorbell has a removable battery, remove the battery from the device and connect it to the charging cable. Here are a few tips to make sure you charge the battery correctly:

  • Always use the provided charging cable, as using a different cable might damage the battery.
  • Charge the battery in a safe location and away from direct sunlight or heat sources.
  • Keep the battery connected to the charger until it reaches full charge to prolong its useful life.

Cleaning the Device

Dirt and debris can decrease the device’s efficiency, so regular cleaning is necessary. Here’s a step-by-step guide on cleaning your Ring Doorbell:

  1. Before you start, ensure to disconnect any wires and/or remove the battery to avoid electric shocks or short circuits.
  2. Use a soft, lint-free cloth to gently wipe the camera lens, motion sensor, and other sensitive components. Avoid using excessive pressure, as this may damage the device.
  3. For stubborn grime or dirt, dampen the cloth with a mild cleaning solution and gently clean the affected area. Do not let any liquid enter the device, as it may cause damage.
  4. Use a dry cloth to remove any remaining moisture from the device.
  5. Once the device is clean and dry, reconnect any wires and/or insert the battery before mounting the doorbell back on the wall.

By following these simple maintenance tips, you’ll ensure your Ring Video Doorbell remains in top-notch condition and continues to provide you with reliable security and convenience.

Smart Home Integration and Notifications

Integrating your Ring Doorbell Pro with smart home devices can greatly enhance the convenience and security of your home. This section will guide you through connecting your Ring Doorbell Pro to Amazon Echo and setting up notifications with Nest and other home security systems.

Connecting to Amazon Echo

To connect your Ring Doorbell Pro to an Amazon Echo device, follow these simple steps:

  1. Open the Amazon Alexa app on your smartphone.
  2. Navigate to the “Devices” tab.
  3. Tap on the “+” icon and select “Add Device.”
  4. Choose “Ring” from the list of devices and follow the setup instructions.

When the setup is complete, your Amazon Echo will notify you when someone is at your door or when motion is detected. You can also ask Alexa to show a live view from your Ring Doorbell Pro on an Echo device with a screen, such as the Echo Show.

Using Nest and Other Home Security Systems

Integrating your Ring Doorbell Pro with Nest and other home security systems can provide you with more comprehensive protection and advanced features. Follow these steps to set up notifications with your chosen home security system:

  1. Install the dedicated app for your home security system on your smartphone.
  2. Create an account or log in to an existing account.
  3. Go to “Settings” (usually symbolized by a gear icon) and find the “Notifications” or “Alerts” section.
  4. Select the option to add a new device and choose “Ring Doorbell Pro” from the list of compatible devices.
  5. Follow the setup instructions to integrate your Ring Doorbell Pro with the security system.

Once the setup is complete, you’ll receive notifications from your home security system’s app whenever your Ring Doorbell Pro detects motion or a visitor at your door.

Additionally, your home security system may offer advanced features, such as triggering lights or alarms when the doorbell is activated.

Troubleshooting and Solutions

Reinstalling the Doorbell

If you need to reinstall your Ring doorbell after removing it, make sure you have all the necessary hardware for the installation process. To ensure an easy-to-use guide, follow these steps:

  1. Choose a suitable location for the camera, considering both power source and motion sensor coverage.
  2. Mount the mounting bracket on the wall in the desired position, ensuring it is leveled.
  3. Secure the bracket using the provided screws, which might require a drill if your wall is not pre-drilled.
  4. For wired Ring doorbells, connect the wires to the terminals on the back of the doorbell according to the manufacturer’s instructions.
  5. Attach the doorbell to the mounting bracket until it clicks into place.
  6. Attach the cover or faceplate using the security screws included in the package.
  7. For some models, you might need a special screwdriver, such as a T15 Torx head screwdriver, to tighten the security screws.

After reinstalling your Ring doorbell, test its functionality to confirm that everything is working properly.

Relocating the Device

When relocating your Ring doorbell, it is essential to consider factors like power source, camera coverage, and motion sensor detection range. If you decide to move the device, follow the steps below:

  1. First, remove the ring doorbell by loosening the security screws and gently pulling out the device.
  2. Next, carefully disconnect any wires connected to the doorbell if it is a wired model.
  3. Remove the mounting bracket from the wall and fill any holes left by the screws with silicone or another sealant.
  4. Choose a new location for the doorbell, making sure it provides optimal coverage and performance.
  5. Proceed to mount the doorbell at the new location, following the installation steps mentioned in the “Reinstalling the Doorbell” section above.

By following these instructions, you can successfully relocate your Ring doorbell without damaging the device or the mounting surface.

When to Use Professional Help

While it is possible to remove a Ring doorbell without any tools, there are situations where you may want to seek professional assistance. In some cases, attempting to remove the doorbell on your own can cause damage to the device, your door, or the wiring.

If you’re using a no-drill ring mount, removing the doorbell is generally straightforward. However, if you find the removal process challenging or if the doorbell is firmly stuck in place, it is best to consult an expert to ensure no damage is done to your components.

Furthermore, if you are not comfortable dealing with electrical wiring, it’s important to call in a professional to safely remove the doorbell. Handling wires incorrectly can result in electrical hazards or damage to the doorbell itself.

Another reason to consider professional help is when you plan to relocate the Ring doorbell to another location or property. A skilled technician will know the best practices for uninstalling, transporting, and reinstalling the device with minimal disruption.

In summary, seek professional assistance when:

  • You are struggling with the removal process.
  • You don’t feel comfortable handling electrical wiring.
  • You are relocating the doorbell to another location or property.

Remember, while removing a Ring doorbell without tools can be convenient, it’s essential to prioritize your safety and the integrity of the device.