Turn Off Blue Light on Ring Doorbell

As a Ring Doorbell user, you might be wondering if there’s a way to turn off the blue light that appears when the device is recording or when motion is detected. The blue light serves as an indicator of the doorbell’s status, but in some situations, you may prefer not to have it visible. In this article, we will explore the options available to you for disabling the blue light on your Ring Doorbell.

One of the simplest methods to turn off the blue light is by using blackout tape to cover the LED. However, it’s important to note that this method comes with a few drawbacks, such as losing the ability to identify the device’s status at a glance.

Can You Turnoff the Ring Video Doorbell’s Blue Light?

The Ring Doorbell’s blue LED light appears during several different scenarios such as Charging Indicator, Two-Way Audio Indicator, when Starting Up and as a Firmware Update Indicator.

Charging Indicator

When you connect your Ring Doorbell to a power source for charging, you may notice a spinning blue light. This light indicates that the device is connecting to your home’s Wi-Fi network. Once connected, the spinning blue light should stop, turn solid, and then shut off. This process usually takes about a minute to complete. If the light continues to spin, check your Wi-Fi signal strength near your Ring Doorbell.

Two-Way Audio Indicator

When you activate the two-way audio feature of your Ring Doorbell, either by accepting a doorbell press or initiating a Live View, the blue light will also illuminate. This light indicates that the two-way audio is active, and you can communicate with the person at your door. The blue light will turn off when you end the two-way audio call.

Starting Up and Firmware Update Indicator

When your Ring Doorbell starts up or receives a firmware update, you might observe a blue light. In these cases, the blue light may flash or spin, indicating that the device is either powering on or undergoing a software update. Allow a few minutes for these processes to complete, as interrupting them may affect your Ring Doorbell’s performance. The blue light will stop once the startup or update is complete.

How to Turn Off the Blue Light

You can either disable the LED through the Ring App or use a factory reset.

Disabling the LED Through the Ring App

Unfortunately, at the moment, Ring does not offer a specific option to turn off the blue light through the Ring App. However, you can use the following workaround to minimize the impact of the LED light:

  1. Open the Ring App on your device.
  2. Select the device for which you want to disable the blue light.
  3. Tap on ‘Settings.’
  4. Look for the ‘LED Light Settings,’ if available, and toggle the switch to disable the blue light. Note that this option might not be available in all Ring Doorbell models.

If the above steps don’t work, consider the next method.

Using a Factory Reset

Performing a factory reset on your Ring Doorbell can potentially help to turn off the blue light. To do so, follow these steps:

  1. Locate the reset button on the back of your Ring Doorbell.
  2. Press and hold the reset button for about 15-20 seconds.
  3. Release the button and wait for the device to restart.
  4. Once the Ring Doorbell restarts, the blue light should turn off.

Keep in mind that a factory reset will erase all your device settings, and you will have to set up your Ring Doorbell again. Make sure to consult your device manual or contact Ring support if you encounter any issues.

Troubleshooting Blue Light Issues

Blue light issues with your Ring doorbell can be annoying, but here are some troubleshooting tips to help you resolve them.

Flashing Blue Light

If your Ring doorbell is flashing blue, it could be an indication of insufficient power. Ensure that the device is connected to a proper power source or has a backup battery. If needed, check the Ring app’s ‘Device Health’ section to see the required voltage for proper operation.

Another possibility is that the internal power cell is still charging. In this case, wait for the charging process to complete before setting up your device. This could take up to an hour.

Security and Privacy Considerations

When it comes to your Ring doorbell, there are several security and privacy considerations to keep in mind.

Night Vision and Intruders

Night vision is a key feature on your Ring doorbell that helps in monitoring your property during low-light conditions. By turning off the blue light, you might worry about how it will affect the device’s ability to provide clear footage at night. Rest assured, disabling the blue light on your Ring doorbell does not impact its night vision capabilities. It will continue to work efficiently, detecting any unusual activity or intruders near your property.

Recordings and Notification Management

It’s important to remember that the Ring doorbell will still record events and provide notifications even with the blue light off. This ensures you don’t miss out on any crucial details or alerts concerning the security of your property.

To bolster the effectiveness of your Ring doorbell as a deterrent, consider the following measures:

  • Place a sticker or sign indicating the presence of a security camera, which can discourage potential burglars.
  • Regularly check your motion alert settings to ensure the sensitivity and range are suitable for your needs.
  • Ensure you are receiving timely notifications and adjust settings as necessary for better management.

By taking these steps, you can maintain a high level of security and privacy without compromising the functionality of your Ring doorbell.

Getting Additional Help and Support

If you’re still struggling to turn off the blue light on your Ring Doorbell, don’t worry – help is available. Contacting customer support is a great option to receive personalized assistance with your issue. You can reach them via phone, email, or live chat, depending on your preference.

Another helpful resource is the Ring Community forum, where fellow users discuss common issues, share solutions, and provide tips on maximizing your Ring experience. By participating in these discussions, you can gain knowledge about potential solutions to the blue light issue that other users have discovered.