Wyze Cam Yellow Light: Quick Troubleshooting Guide

Wyze Cam is a popular smart home security camera known for its affordability and ease of use. However, at times, you may encounter an issue with the Wyze Cam displaying a solid yellow light.

The yellow light on the Wyze Cam can arise from incorrect settings, connection issues, and device malfunctions.

Understanding the Wyze Cam Yellow Light

Wyze Cams, like many other smart devices, have status lights to help users understand the device’s current state. The yellow light is one such indication on Wyze Cams, and it can provide essential information about the camera’s condition. In this section, we will delve into the meaning behind a solid yellow light and a flashing yellow light on your Wyze Cam.

Solid Yellow Light

A solid yellow light on a Wyze Cam typically signifies that the device is powered on and in the process of establishing a connection. During this phase, the camera might be trying to connect to Wi-Fi, pair with the base station, or sync with the app. If the yellow light stays on for a prolonged period, it may indicate a problem with the connection or camera.

To troubleshoot a persistent solid yellow light:

  1. Check if the device is properly connected to power.
  2. Ensure that the Wi-Fi network is functioning and within range.
  3. Make sure the camera is synced with the Wyze app.
  4. Try restarting the camera by unplugging it and plugging it back in.
  5. If all else fails, perform a factory reset on the camera.

Flashing Yellow Light

A flashing yellow light on a Wyze Cam indicates that the device is attempting to connect to the Wi-Fi network. This flashing pattern shows that the device is either experiencing connectivity issues or is in the process of reconnecting to the network.

To address a flashing yellow light:

  1. Double-check your Wi-Fi connection and make sure the network is functioning.
  2. Verify that the camera is within the Wi-Fi network’s range.
  3. Restart the camera by unplugging it and plugging it back in.
  4. Reconfigure your camera’s Wi-Fi settings through the Wyze app.
  5. If necessary, perform a factory reset on the camera.

By understanding the meanings behind the yellow light on your Wyze Cam, you can effectively troubleshoot any issues and ensure that your device remains fully functional. Remember to always consult the provided documentation and support resources if further assistance is needed.

Troubleshooting Wyze Cam Yellow Light Issues

Power Cable and USB Cable

If your Wyze Cam is showing a solid yellow light, it might be due to power issues. Make sure you are using the original cord and adapter that came with your Wyze Cam. If possible, try switching out the cord and/or adapter to see if the camera powers on. Also, try plugging your camera into a different power outlet to ensure it isn’t an outlet issue.

Internet Connection and Router

Check your internet connection and router settings as they can impact the Wyze Cam’s functionality. If you have a solid blue light yet the setup has failed, try the following steps:

  1. Force close the Wyze app, reload it, then reattempt the connection.
  2. Power cycle the camera by unplugging it, waiting for 10 seconds, and plugging it back in.
  3. Reattempt to connect and set up the camera within the app.

If the issue continues, try changing your internet connection type (e.g., switch from Wi-Fi to mobile data), or reset your router.

Setup Button and Pairing

Another potential cause of the solid yellow light could be an issue with the setup button or pairing process. To troubleshoot:

  1. Turn off the camera and unplug it.
  2. Press and hold the setup button while plugging in the power cable.
  3. Wait for the light to turn solid blue (3 to 5 seconds), then release the setup button.
  4. Allow 3 to 5 minutes for the camera to pair with the app, and check if the issue is resolved.

MicroSD Card and Local Storage

A problematic MicroSD card or local storage may also contribute to the yellow light issue. To fix this:

  1. Turn off the camera and remove the MicroSD card.
  2. Check if the camera starts working again.
  3. If the issue persists, try using a different MicroSD card.

Firmware and Wyze App

Firmware issues can cause the solid yellow light to appear on your Wyze Cam. Reflashing the firmware might resolve the problem:

  1. Download the latest firmware version from the Wyze website.
  2. Extract the firmware file and save it to a MicroSD card.
  3. Follow the same steps from the “Setup Button and Pairing” section with the MicroSD card inserted.
  4. Wait for the firmware to install (3 to 5 minutes), then check if the camera starts working again.

Additionally, updating the Wyze app on your device may help with any compatibility problems. Check your device’s app store for available updates, and install them accordingly.

Remember, when troubleshooting, always approach the situation with confidence and knowledge. Following these steps and maintaining a neutral, clear tone will increase the likelihood of resolving Wyze Cam yellow light issues.

Wyze Cam Light Guide

Solid and Flashing Lights

Wyze Cam devices are equipped with a status light that helps users determine the current state of their camera. The status light can be solid or flashing in different colors, such as yellow, blue, and red, depending on the camera’s condition.

Status Light ColorDefinition
Solid Yellow LightWhen your Wyze Cam is powered, the status light should turn solid yellow, indicating it is receiving power.
Flashing Yellow LightAfter a camera reset, the LED on the back should move from a solid yellow light to a flashing yellow light. This indicates that the device is ready for setup once again.
Solid Blue LightA solid blue light indicates that the Wyze Cam is properly connected to Wi-Fi and fully operational.
Flashing Blue LightA flashing blue light indicates that your camera is currently pairing or attempting to connect to your Wi-Fi network.
Solid Red LightA solid red light means that the camera is connected to your Wi-Fi but cannot access the internet.
Solid Purple LightA solid purple light indicates that the camera’s SD card is currently being accessed or it is experiencing a glitch. This may require troubleshooting, such as reformatting or replacing the SD card if issues persist.
Flashing Red and Blue LightA flashing red and blue light signifies that the camera has failed its firmware update. In this case, users should try manually re-flashing the firmware using the recommended version, like FIRMWARE_660R_F_3.9.1.102.

Advanced Settings and Customization

Wyze Cam offers both a Settings and an Advanced Settings menu, allowing users to fine-tune the camera’s performance and customize various features to suit their preferences. These options help enhance the usability and overall experience of using a Wyze Cam device, including the v1/v2 and Pan models.

To access the Advanced Settings menu, follow these steps:

  1. Open the Wyze app and tap on your Wyze Cam.
  2. Tap on the Settings gear icon in the top right corner.
  3. Select Advanced Settings.

In the Advanced Settings menu, users can find a wide array of options to adjust, enabling them to control various aspects of the camera’s functionality. Some key settings include:

  • Night Vision Mode: Toggle night vision on/off, or set it to automatic based on ambient light conditions.
  • Status Light: Enable or disable the status light, which can be particularly useful in cases where the solid yellow light could be distracting or where stealth is necessary.
  • Local Storage: Customize settings related to microSD card usage, such as continuous recording, scheduled recording, or event-based recording.
  • Alert Settings: Adjust the sensitivity and detection zones for motion and sound alerts to minimize false alarms and ensure the camera is capturing accurate information.

These advanced settings give users more control over their Wyze Cameras, allowing for tailored usage based on individual needs and environments. By optimizing these settings, users can ensure that their Wyze Cam performs at its best, providing a reliable and effective home security solution.

Frequently Asked Questions

What does a blinking yellow light mean on a Wyze Cam?

A blinking yellow light on a Wyze Cam indicates that the camera is powering on or attempting to connect to Wi-Fi.

How can I reset my Wyze Cam if it’s showing a yellow light?

To reset your Wyze Cam, unplug the camera, wait for a few seconds, and then plug it back in. If the yellow light remains, use a pin or paperclip to press and hold the Reset button located on the bottom of the camera for about 5 seconds. The camera should reboot and indicate the process with a blinking yellow light.

Why is my Wyze camera flashing blue and yellow?

A Wyze Cam flashing blue and yellow lights alternately signifies that the camera is awaiting a firmware upgrade or is having issues completing the process. It is essential to ensure your camera is connected to the internet and placed near the Wi-Fi router.